Career

Automation Engineer

Responsibilities:

• Responsible creating and maintaining control program for manufacturing equipment
• Responsible for writing and developing a program based on customer and management requirements
• Responsible on utilizing hardware and developing software to control and improve the efficiency of manufacturing equipment.

Requirements:

• Diploma/Advanced Diploma or Degree in Computer Science/Information Technology or equivalent.
• At least 1 year of working experience in the related field is required for this position.
• Fresh graduates are also encouraged to apply.
• Familiar with VB.Net, SQL Server, Control Programming
• Applicants must be willing to travel & work in Bayan Lepas.
• Preferably Junior Executives specializing in IT/Computer – Software or equivalent.

Control Engineer

Main Responsibilities

• Design electrical schematic diagram for automation machine.
• Create electrical panel layout, cable routing layout, etc.
• Generate bill of materials or select electrical components that need to purchase for the machine.
• Communicate with team on machines specification and component selection.
• Coordinate with assembly team to provide guidance in electrical/ wiring whenever necessary.
• Write machine manuals, setup procedures and machine checklist.
• Onsite service and troubleshooting should there be need arises.
• Other duties and assignments as instructed by superiors.

Requirements:

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Engineering (Electrical/Electronic/ Mechatronics) or equivalent.
• Required skill(s): Autodesk, AutoCad and MS Office.
• Knowledge in servo motor, robot and PLC programming would be an added advantage.
• Fresh graduates are welcome to apply.

Drafter / Designer

Job Objective:

• Document/ drawing control.
• To ensure final product design/ drawing comply with regulation and quality standard.

Responsibilities:

• To create products/ components drawing.
• To assist products designer.

Requirements:

• Minimum 3 years & above working experience as drafter/ designer or in similar role.
• Hands-on experience with computer-aided design software.

Facility Engineer/Technician

JOB OBJECTIVE

• Ensure all the company’s facilities are in good condition and well maintained.

RESPONSIBILITIES

• Coordinate and carry out overall plant maintenance and housekeeping.
• Ensure all facility equipment and machines are well maintained as per procedures.
• Establish a systematic Preventive Maintenance program and procedures for implementation with the ISO requirement.
• Minimize equipment downtime.
• Coordinate and supervise contractor work on maintaining, servicing, housekeeping and constructions work in the premises.
• Ensure all contractors follow the safe work practice.
• Ensure the company complies with all local authority rules & regulations such as BOMBA, JKKP, MBPP, Tenaga Nasional and Safety and Health (DOSH) Department.
• Ensure all equipment installations including schedule wastes disposals are according to the local authority Environmental Act.
• Keeps fire equipment, alarms, switches, and sensors in good working condition.
• To carry out the duties as a committee member for OSH and ERT.
• Carry out project as assigned by the company from time to time.
• Collect data of cleanroom environment and maintain condition according to specification
• Provide weekly and monthly report of cleanroom performance.
• Create and maintain Standard Operation Procedure.
• Attend internal and external audit.
• Perform daily checking of facility environment and equipment.
• Responsible for scheduled waste and normal waste disposal. Update waste data in DOE system. 

JOB REQUIREMENTS

• Diploma in electrical or electronic engineering.
• Passes minimum of Chargeman AO certificate conducted by Suruhanjaya Tenaga.
• Minimum 3 years of working experience preferably in electrical field.
• Minimum 1 year of working experience in medical device cleanroom environment maintenance. 
• Minimum 2 years of working experience in HVAC, Air Compressor, DI Water System equipment.
• Ability to troubleshoot electrical equipment.
• Able to perform general facility and utility repairs
• Able to handle projects independently.

Firmware Engineer

Responsibilities

• Responsible for Firmware / Embedded Software Architecture.
• Conduct Feasibility Study, Design, Implementation, Testing & Maintenance.
• Develop & test new ideas for product improvement.
• Actively participate in cross-functional teams to develop hardware modules as well as address design issue or maintenance of existing hardware modules.
• Analyse & enhance efficiency, stability & scalability of system resources.
• Evaluate, test & review designs to ensure program perform according to requirements & specifications.
• Contribute in continuous improvement across all hardware.

Requirements:

• Bachelor Degree in Electrical/Electronics/Computer Engineering.
• Min 1 year working experience on embedded software and application development.
• Experience architecting firmware, hardware & software interface.
• Good technical & analytical skill with ability to perform electronic system debug effectively.
• Proficient in C programming.
• Advance level knowledge on RTOS and embedded system architecture.
• Understanding on communication transport protocol such as SPI, I2C, UART, USB, Ethenet.
• Full-Time position(s) available.
• Fresh graduate are encourage to apply.

Imaging Specialist

Responsibilities

• Develop and implement X-ray and computed tomography (CT) imaging techniques.
• Optimize imaging parameters and protocols to achieve high-resolution and accurate results.
• Evaluate and select appropriate X-ray and CT sources based on application requirements, such as resolution, penetration power, and beam quality.
• Ensure compliance with industry standards and safety regulations related to X-ray and CT imaging.
• Conduct feasibility studies and technical assessments of different X-ray and CT sources and technologies.
• Stay updated with the latest advancements in X-ray and CT imaging technology and incorporate new methods into existing workflows.
• Conduct research and development to improve imaging techniques and expand the capabilities of X-ray and CT inspection.
• Ensure all X-ray and CT imaging processes comply with relevant industry standards and safety guidelines.
• Develop and update standard operating procedures (SOPs) for X-ray and CT imaging.

Educational Background

• Bachelor’s or Master’s degree in Physics, Electrical Engineering, Materials Science, or a related field.
• Specialized coursework or experience in X-ray and CT imaging, non-destructive testing (NDT), is highly desirable.

Skills and Experience

• Strong understanding of X-ray and CT physics and imaging principles.
• Experience with X-ray and CT inspection equipment and software.
• Proficiency in image processing and analysis techniques for both X-ray and CT imaging.
• Familiarity with industry standards and safety regulations related to X-ray and CT imaging.
• Experience with AI and ML techniques for image analysis and defect detection is a plus.
• Experience with data management and statistical analysis software (e.g., MATLAB, Python, R).

Mechanical Design Engineer

Job Objectives:

• Provide automated equipment mechanical design from concept to manufacturing.
• Provide technical guidance on the precision parts, motions, structure and thermal management.
• Provide technical guidance on the material selection.

Responsibilities:

• Interact with Marketing to develop specifications for new product development.
• Design and fabricate prototypes i.e. mechanical enclosure and evaluate the performance of the prototype.
• Interact with customers in new product trials.
• Proactive in identifying design and technical challenges in early design stage.
• Create new, innovative and creative idea to solve technical challenges in Analog design

Requirements:

• Possess Degree/Diploma in Mechanical/Mechatronic Engineering or equivalent.
• At least 2 years of working experience, preferably in automated equipment design environment.
• Applicants must be willing to work in Bayan Lepas.
• Preferably applicant specializing in Engineering – Mechanical/Automotive or equivalent.
• Full-Time positions available.

Skill Required:

• Experience in Inventor 3D CAD tool, precision tolerance, motor, cylinder an actuator selection.
• Hands-on experience in assembly, problem analysis and solving.
• Working knowledge in electronics industry.

PLC Software Engineer

Responsibilities

• Write and maintain programming documentation, software technical documentations.
• Ensure quality delivery of software feature within the agreed timeline.
• Analyze reported software issues, providing containments and produce detailed report out of it.
• Implement solution/ fix for reported software issues.
• Manage interactions and communications with Product, Hardware engineering, and Software QA engineering teams.
• Responsible for PLC software programming & automation software programming to support the team.
• Establish realistic timeline estimations for tasks and at the same time ensuring they are still remain on target to meet datelines.
• Prepare and maintain software technical documentations.

Requirements:

• We are looking for those who have enthusiasm and passionate on new challenge in programming work.
• Bachelor’s Degree in Computer Science/ Information Technology, Engineering (Computer/ Telecommunication), Electrical & Electronic, Mechatronic or equivalent.
• Able to work with complex software architecture, which leverages advanced Object Oriented Design principles.
• Good technical writing abilities including software design specification and software requirement specification.
• High sense of urgency for task assigned.
• Able to work hard to meet datelines.
• Creative, innovative, out of the box problem solving.
• Fresh graduate are welcome to apply.

Production Technician / Engineer

Responsibilities

• Responsible of checking parts arrival and status using EBS.
• Responsible of drawing out necessary parts needed for project from store and production cabinet (pneumatics fittings, screws etc.)
• In charge and responsible of machine assembly, panels assembly, wiring, pneumatics routing and trunking management.
• Responsible of tool testing and alignment for machine optimum operation.
• Responsible of machine data collection for buy-off or verification purposes as per request by manager.
• Assist project team during project buyoff by customer.
• Actively participate in any assignment given by production management.

Requirements:

• Min SPM/ SKM/ Diploma/ Certificate in Engineering (Electrical/ Electronic/ Mechanical or equivalent qualification.
• Min 1 year of working experience in related field.
• Knowledge / hands-on skill in mechanical or electrical assembly.

Project Engineer & Senior Engineer

Job Objective:

• Responsible for project coordination activities and execute establish plan.
• Enhance product manufacture process and provide support to operation. Ensure on time delivery and good quality product to customer.
• Manage and maintain product technical information. Ensure information are up to date and proliferate into relevant department involve.
• Provide technical consultancies and support to all relevant parties for potential business and opportunities.

Responsibilities:

• Responsible for coordinating and monitoring assigned project activities or task according to project schedule/ planning.
• Review new product technical information. Any discrepancy or doubt regarding technical information shall perform communication with customer and communicate with related parties to obtain their approval.
• Ensure manufacturing flow is carrying out according to project schedule to prevent unforeseen circumstances.
• Establish product inspection check list, visual and inspection criteria for new product if documents are not applicable by customer.
• Perform data analysis and failure analysis report for customer complaint regarding technical or workmanship issues.
• Follow Pentamaster ISO procedures and requirements. Feedback to superior if procedures are not able to follow or meet work requirements.
• Ensure 5S’s at work areas at all the times able for customer’s spot check / Audit at any time.
• Any others assignment assign by superior from time to time.

Requirements:

• Diploma in Engineering / Mechanical / Electrical & Electronic / Mechatronic / Equivalent.
• Minimum 2 years’ experience.
• Japanese speaking is a MUST
• Must be computer literate; – (Microsoft Word, Excel & PowerPoint)
• Able to perform work independently.
• Must have technical background and knowledge in mechanical.
• Must able to understand mechanical drawing.

R&D Software Engineer (LabVIEW)

Responsibilities

• To develop software (LabVIEW/Test Stand) of automation machine.
• Research and integrate new automation technologies towards automation of testing.
• Perform continuous improvement in software performance and system optimization.
• Generate technical documents, such as proposals, reports, flow chart etc.
• Ensure quality delivery of software features within the agreed timeline.
• Constantly learn new things—and share them with your team members.
• Other duties/activities as assigned by management.

Requirements:

• Bachelor’s Degree in Engineering or Computer Science with 2+ years relevant work experience.
• Experience in design and development of automated test system.
• Certificate of LabVIEW CLAD and Test Stand CLD or higher level will be advantageous.
• Proficient with LabVIEW, Test Stand, C#, Object Oriented Programming, strong fundamentals in software development and best practices.
• Fresh graduates are welcome to apply
• Candidate with immediate availability will be advantageous

Senior Automation Software Engineer

Responsibilities

• To develop software of automation machine and maintain control program for manufacturing equipment.
• Ensure quality delivery of software features within the agreed timeline.
• Analyze reported software issues, debugging, troubleshoot, and fix the machine according to specification.
• Implement solution/ fix for reported software issues.
• Manage interactions and communications with Product, Hardware engineering, and Software QA engineering teams.
• Provide solutions to machine and programming problems. Interacting with customers to provide technical support, troubleshooting, and resolves machine issues.
• Establish realistic timeline estimations for tasks and at the same time ensuring they still remain on target to meet datelines.
• Prepare and maintain software technical documentation.

Requirements:

• Bachelor’s Degree in Computer Science/ Information Technology, Engineering (Computer/ Telecommunication), Engineering (Electrical/ Electronic), Engineering (Mechatronic/ Electromechanical) or equivalent.
• Programming skills in PLC, C#, VB, ASP.net, Javascript, HTML, bootstrap, MSSQL, MYSQL
• Able to work with complex software architecture, which leverages advanced Object-Oriented Design principles.
• Good technical writing abilities including software design specification and software requirement specification.
• High sense of urgency for task assigned.
• Able to work hard to meet datelines.
• Fresh graduate are welcome to apply.

Senior Design Engineer – Analog

Job Identification:

• Job Title: Senior Design Engineer – Hardware – Analog

Job Objective:

• To design and develop product that meet customer requirement.
• Mainly focus on the Analog Design, High Speed Analog Data Acquisition Card/Module Design.

Main Responsibilities and Duties:

• Turn electronic design into schematic, PCB layout, and finally working product that meet product specification.
• Research, Design, Prototype build, Testing and Debugging, Product qualification.
• Prepare technical document for design review and project update.
• Involve in other technical related work as directed by upper management or required by the company.

Job Requirements

• Qualifications
• Master or Bachelor of Electrical and/or Electronics Engineering or equivalent.
• Experience
• Must have strong knowledge in Electronics fundamental.
• Must have experience in electronic design.
• Knowledge in schematic, PCB layout and circuit board troubleshooting.
• Hand-on in electronic or hardware design experience in university/college or current work.
• For Senior, minimum 5 years in relevant field.
• Mainly focus on the Analog Design, High Speed Analog Data Acquisition Card/Module Design. Candidate with experience in High Speed Analog Data Acquisition design knowledge and experience are most highly referred.

Skill

• Able to turn electronic design into schematic, PCB layout, debug and final working product.
• Able to performance test and measurement, and solderinig.
• Ability to Communicate with all levels.
• Able to work independently, good analytical and problem solving skill.
• Must be creative, innovative, resourceful, self-discipline and eager to learn new thing.

Senior Hardware Design Engineer

Responsibilities

• Turn electronic design into schematic, PCB layout, and finally working product that meet product specification for high power semiconductor test development.
• Research, Design, Prototype build, Testing and Debugging, Product qualification.
• Prepare technical document for design review and project update.
• Engage with customer to develop test solution that meet customer requirement.

Requirement:

• Strong knowledge in Electronics fundamental is a must.
• Knowledge in schematic and PCB layout.
• Able to work independently, good analytical and problem solving skill.
• Must be creative, innovative, resourceful, self-discipline and eager to learn new thing.

Education & Experience:

• Bachelor Degree in Electronics Engineering or equivalent.
• Hand-on in electronic or hardware design experience in university/college or current work is highly advantage.
• More than 5 years working experience in R&D or related field.

Qualification:

• Diploma, Advanced/Higher/Graduate Diploma, Bachelor’s Degree, Post Graduate Diploma, Professional Degree in Electrical & Electronics Engineering.

Specializations:

• Engineering, Electronics, Hardware, Design.

Service Engineer

Responsibilities

• To participate & involve in new design testing equipment assembly, setup, instruments calibration, commissioning & troubleshooting.
• To provide technical support on new & existing on-multiple-site equipment including system setup, maintenance, troubleshooting/ debugging.
• To perform overall equipment productivity improvement including feasibility studies & relevant action plans on weekly basis.
• To improve customer support plan as well as establishing good customer relationship to ensure 100% customer satisfaction.
• To update & maintain detailed documentation timely prior to service tasking execution based on defined process control plans & work instructions.
• To coordinate & perform necessary program re-deployment & data collection after re-installation of reworked/ recalibrated equipment’s modules.
• To develop & maintain service SOP in accordance to company quality policy.
• To attend to customers’ feedback & meet customers’ requirement by liaising with relevant divisions e.g. resolving technical issues etc.

Requirements:

• Diploma/ Degree in Engineering related discipline, preferably in Electronic/ Electrical/ Microelectronic/ Mechatronic/ Mechanical Engineering or equivalent.
• Min. 3~5 years working experience in hands on equipment mechanical & electrical assembly & testing, industrial automation related field will be added advantages.
• Knowledge in LabView/ PLC software programming will be also an added advantage.
• Demonstrate strong ability to comprehend technical diagrams, control drawings & procedures.
• Knowledge in techniques in system set-up, buy-off, principles, tools & instruments, schematic & control drawings, technical diagrams & models.
• Highly responsible, customer-service oriented and detail-oriented.
• A good team player and able to work independently with minimal supervision.
• Able to travel to multiple customer sites in Johor and Singapore.
• Possess knowledge to setup, support and troubleshoot automated back-end equipment, test handlers and testers.
• Self-discipline, maintain good attendance and update service records.
• Required to attend equipment training in HQ, Bayan Lepas Penang.

Software Developer

Responsibilities:

• To develop, test & deploy internal application system of the Company.
• To support end user request in application related matters including system technical documentation.
• Participate in other team project/ meeting in order to assist in application related matters.
• To source & coordinate with external parties which will help in maintain the throughput of operation.
• To involve in continuos improvement program which aim to increase effiency & effectiveness including cost down of expenses.

Requirement:

• Bachelor’s Degree in computer science, or any related field.
• Possess technical knowledge of ASP.NET VB Script, Windows Application, ASP.NET Web Application MVC C#, SQL Server store procedure, excel macros.
• Proven work experience related to software engineering.
• Able to take on steep learning curves, i.e. learning new programming languages quickly.
• Ability to be organized & multitask in fast-paced working environment.
• Possess excellent verbal & written communication to collaborate with other departments.
• Skilled in written communication to properly document software development procedures.

Software Engineer

Responsibilities:

• Responsible for system development, testing, debugging, implementation and documentation of business application.
• Developing existing program according to system enhancement request.
• Creating technical specification and test plan.
• Writing operational documentation with technical authors.
• Analyzing user requirement, researching, designing and writing new software program.
• To provide support to existing and new customer on project as and when required.

Requirements:

• Diploma/Advanced Diploma or Degree in Computer Science/Information Technology or equivalent.
• At least 1 year of working experience in the related field is required for this position.
• Fresh graduates are also encouraged to apply.
• Familiar with VB.Net, SQL Server, C#.
• Applicants must be willing to travel & work in Bayan Lepas.
• Preferably Junior Executives specializing in IT/Computer – Software or equivalent.

Test Development Firmware Engineer

Responsibilities:

• Design and develop firmware, FPGA and embedded solution for Photonics and Electronics ATE System for Camera Sensor, MOSFET, IGBT and RF products.
• Provide documentation of design, prototype, validation and implementation of assigned project.
• Perform system setup and testing to ensure system is meeting customer specification.
• Manage supply chain for embedded component, IP, equipment, system design and fabrication.
• Perform evaluation, research, experiment, prototyping, proof of concept and data analysis to determine cause effect of issue and to provide solution.
• Responsible for overall project, design, development, buyoff and continuous improvement.

Requirements:

• Bachelor or Master Degree, Post Graduate Diploma, Professional Degree in Electrical and Electronics Engineering, Computer Engineering, Computer Science or equivalent.
• Experience in firmware IDE, FPGA IDE, VHDL, Verilog, C++, C and assembly language.
• Knowledge in operating system, communication protocol such as TCPIP, UART, USB, I2C, SPI, MIPI, LVDS and driver development.
• Strong in verbal and written communication skill.
• Ability to collaborate with cross-functional technical teams.
• Experience in lab equipment such as oscilloscope, DMM, function generator etc.
• 1-3 years of working experience in related field.
• Good analytical and problem solving skills.
• Motivated, strong learning ability and with positive attitude.
• Applicant must be willing to work in Penang and travel on assignment.

Test Development Hardware Engineer

Responsibilities:

• Design electronic circuit, schematic and board layout of Photonics and Electronics ATE System for Camera Sensor, Power Amplifier, MOSFET, IGBT and RF products.
• Provide documentation of design, prototype, validation and implementation of assigned project.
• Responsible for transfer of customer requirement into schematic, layout and final test board meeting quality for test.
• Perform system setup and testing to ensure system is meeting customer specification.
• Manage supply chain for electronic component, equipment, system design and fabrication.
• Perform evaluation, research, experiment, prototyping, proof of concept and data analysis to determine cause effect of issue and to provide solution.
• Responsible for overall project, design, development, buyoff and continuous improvement.

Requirements:

• Bachelor or Master Degree, Post Graduate Diploma, Professional Degree in Electrical and Electronics Engineering, Telecommunications Engineering, Computer Engineering or equivalent.
• Experience in PCB design software such as Altium, Cadence, Kicad or equivalent.
• Proficiency with simulation tools such as Cadence SI, P-SPICE or equivalent.
• Strong in verbal and written communication skill.
• Ability to collaborate with cross-functional technical teams.
• Experience in testing and debugging boards with lab equipment such as oscilloscope, DMM, function generator etc.
• 1-3 years of working experience in related field.
• Good analytical and problem solving skills.
• Motivated, strong learning ability and with positive attitude.
• Applicant must be willing to work in Penang and travel on assignment.

Test Development Optical Engineer

Responsibilities:

• Design lens system and optical module of Photonics and Electronics ATE System for Camera Sensor, ToF Sensor, Ambient Light Sensor and Proximity Sensor products.
• Manage supply chain for optical component & equipment sourcing, system design and fabrication.
• Collaborate with mechanical and electrical specialists to complete system modelling, analysis and method of performance validation.
• Sustain End of Life component & provide recommendation on the replacement.
• Develop design documentations & requirements specification for assigned projects.
• Responsible to transfer customer requirement into optical system meeting quality for test.
• Manage test methodology, work with project team & customer for system integration.

Requirements:

• Bachelor or Master Degree, Doctorate, Post Graduate Diploma, Professional Degree in Electrical and Electronics Engineering, Optoelectronics, Photonics, Computer Engineering or equivalent.
• Experience in optical design & simulation software such as Zemax or equivalent.
• Strong in verbal and written communication skill.
• Ability to collaborate with cross-functional technical teams.
• Experience in lab equipment such Laser source, spectrometer, spectrum analyzer, interferometer, oscilloscope etc.
• 1-3 years of working experience in related field.
• Good analytical and problem solving skills.
• Motivated, strong learning ability and with positive attitude.
• Applicant must be willing to work in Penang and travel on assignment.

Test Development Software Engineer

Responsibilities:

• Design and develop software solution for Photonics and Electronics ATE System for Camera Sensor, Power Amplifier, MOSFET, IGBT and RF products.
• Develop test specification and test plan from customer requirement.
• Work closely with customer, project team and supplier to ensure timely delivery.
• Monitor, evaluate, analyze and optimize test system to ensure optimal manufacturing yield.
• Perform evaluation, research, experiment, prototyping, proof of concept and data analysis to determine cause effect of issue and to provide solution.
• Responsible for overall project, design, development, buyoff and continuous improvement.

Requirements:

• Bachelor or Master Degree, Post Graduate Diploma, Professional Degree in Electrical and Electronics Engineering, Computer Engineering, Computer Science or equivalent.
• Experience in LabVIEW, TestStand and C++ language.
• Strong in verbal and written communication skill.
• Ability to collaborate with cross-functional technical teams.
• Experience in lab equipment such as oscilloscope, DMM, function generator etc.
• 1-3 years of working experience in related field.
• Good analytical and problem solving skills.
• Motivated, strong learning ability and with positive attitude.
• Applicant must be willing to work in Penang and travel on assignment.

Vision Software Engineer

Responsibilities

• Collect & analyse data to derive cause and effect of manufacturing problems. Recommend methods to fix potential problems.
• Debugging software bugs and gives solutions to customer.
• Analyse and implement customer requirement and resolve software issue.
• Identify the software area to be modified or developed where necessary.
• Develop vision programming to evaluate the raw materials to determine suitability for use.
• Identify and assess the vision software development’s risks.
• Design software for machine vision rejection capabilities.
• Design, develop, troubleshoot and support automated visual inspection system for automation machines.
• Identify and review hardware costs incurred in the software development.
• Work as a team in providing support to production team for machine build issues related to vision.
• Undertake other duties and responsibilities which may assign by the Company from time to time. /li>
• Candidate with image processing background would be an added advantage.

Requirements:

• Bachelor / Master Degree in Computer Science/ Mathematics or engineering discipline.
• Experience in C++/C#, Computer Vision, Open CV, Imaging.
• Develop AOI and imaging applications and implementation.
• Responsible for the project solution design, development, buyoff and continuous development.
• Possess analytical and problem solving skills.
• Fresh graduate are welcome to apply.